Form library · Health and safety
Harness inspection checklist
A harness and lanyard inspection form for pre-use checks, detailed inspections and interim inspections. Check the webbing, stitching, buckles and D rings, energy absorber, connectors and label, record defects with photos and give a result of safe to use, restricted or do not use. The form works out the days since the last detailed inspection and flags one that is more than six months old. The same form also inspects other work equipment under PUWER. Every question is listed below, and you can fill the live form in on this page.
Ready to use from the form library, and every question is yours to edit. Trial from £1, cancel any time.
Try it on your phone
Try it on this phone
Fill in the harness inspection on your phone now
See how the harness inspection looks on your phone
Scan the code with your phone camera. It opens the real form, no sign-up needed.
Open the live example and fill it in, just as your team would on site. No sign-up needed.
See it on this phoneEvery question is editable. Add this form to your account, then change the wording, add or remove questions and options, and make it fit your own jobs.
What should a harness inspection checklist include?
A harness inspection checklist should record the make, model, date of manufacture and the type of inspection, and check the webbing for cuts, abrasion and fraying, the stitching, damage from chemicals, heat, paint or sunlight, buckles, D rings and adjusters, the energy absorber, connector gates and the identification label. HSE recommends a detailed inspection at least every six months, and detailed inspections should be recorded.
Last updated . Facts checked by the SiteSurvey team on 16 October 2026 against HSE INDG367, Inspecting fall arrest equipment made from webbing or rope, regulation 6 of the Provision and Use of Work Equipment Regulations 1998 and regulation 12 of the Work at Height Regulations 2005.
Try the harness inspection form live
Answer a few questions and watch it adapt. Your answers are not saved, and any photos you add are deleted within the hour.
Open the completed example to see fictional readings, notes, photos and calculations. Choose Blank form to try entering your own answers.
Want to see one filled in? See a completed harness inspection report (PDF), made by SiteSurvey from a fictional site visit.
Fill it in on a phone or tablet
Your team completes the work equipment inspection on site in the SiteSurvey app on iPhone, iPad and Android phones and tablets. The project name and address fill in for them, it works without signal, and it syncs when the device is back online with photos kept against the question they answer.
Customers and subcontractors do not need the app: send them a link and they can fill it in from any browser.
Every question in the harness inspection template
Inspection record for a scaffold, ladder, harness and lanyard or pallet racking. The checks change with the equipment, with defects, photos and a result. 6 sections and 82 questions. Follow-up questions and guidance appear only when an answer calls for them, so the person on site never sees the ones that do not apply.
Make it your own: every question is editable
This is a starting point, not a fixed form. Once it is in your SiteSurvey account you can reword any question, add or remove questions, sections and answer options, and add your own logo, so it fits the way your team works and the jobs you do.
Details you only enter once
Add this form to a project in SiteSurvey and it fills in what the project already knows, so nobody on site retypes it and every form on the job uses the same names. Anything filled in can still be changed.
- Project: the project name
- Customer: the project's customer
- Site: the site, when the form is opened for a space or a product
- Site address: the site address, from the space or the project
What is being inspected
The equipment, the reason and who is inspecting.
- ProjectShort answer
Filled in from the project in SiteSurvey.
Fills in from the project name - CustomerShort answerFills in from the project's customer
- Site*Short answerFills in from the site, when the form is opened for a space or a product
- Site addressShort answerFills in from the site address, from the space or the project
- Date of inspection*Date
- Time of inspectionTime
- Inspected byShort answer
- Inspector's positionShort answer
- Equipment*Choose one
- Scaffold
- Ladder or stepladder
- Harness and lanyard
- Pallet racking
- Reference, tag or serial numberShort answer
- LocationShort answer
- Why is it being inspected?Choose one
- Routine inspection
- Before first use or after installation
- After alteration
- After an event that could have affected its safety
- What happened?Short answerShown when “Why is it being inspected?” is “After an event that could have affected its safety”
Scaffold
Walk the whole scaffold, from the base up.
- Type of scaffoldChoose one
- Independent tied
- Putlog
- Birdcage
- Mobile tower
- System scaffold
- Loading bay
- Other (describe)
- Have you seen the handover certificate?Yes or No
- Date of the last recorded inspectionDate
- Days since the last inspectionWorked out by the formShown when “Date of the last recorded inspection” is answered and “Date of inspection” is answered
- WarningInspection overdue. A working platform used for construction work, from which a person could fall 2 metres or more, must not be used unless it has been inspected in that position within the previous 7 days. Work at Height Regulations 2005, regulation 12.Shown only when the answers above make it relevant
- GuidanceIt must also be inspected again after any event that could have affected its safety, such as high wind, impact or alteration.
- Ground, sole boards and base platesChoose one
- OK
- Defect
- Not applicable
- Standards, ledgers, transoms and bracingChoose one
- OK
- Defect
- Not applicable
- Ties and anchorsChoose one
- OK
- Defect
- Not applicable
- Platforms fully boarded, boards sound and securedChoose one
- OK
- Defect
- Not applicable
- Guardrails, mid rails and toe boardsChoose one
- OK
- Defect
- Not applicable
- Ladders, stairs and access gatesChoose one
- OK
- Defect
- Not applicable
- Loading: not overloaded, materials stacked safelyChoose one
- OK
- Defect
- Not applicable
- Protection for the public: fans, netting, lighting, base protectionChoose one
- OK
- Defect
- Not applicable
- Scaffold tag or status sign up to dateChoose one
- OK
- Defect
- Not applicable
Ladder or stepladder
Pre-use checks, done by the person using the ladder.
- TypeChoose one
- Leaning ladder
- Stepladder
- Platform stepladder
- Combination ladder
- Telescopic ladder
- Roof ladder
- Other (describe)
- GuidanceHSE says the person using the ladder should check it at the beginning of the working day, and again after something has changed, such as the ladder being dropped or moved from a dirty area to a clean one.
- Stiles: not bent or damagedChoose one
- OK
- Defect
- Feet: none missing, worn or damagedChoose one
- OK
- Defect
- Rungs: none bent, worn, missing or looseChoose one
- OK
- Defect
- Locking mechanisms: working, not bent or wornChoose one
- OK
- Defect
- Not applicable
- Stepladder platform: not split or buckledChoose one
- OK
- Defect
- Not applicable
- Steps or treads: clean, fixings tightChoose one
- OK
- Defect
- Not applicable
- Will the ladder be used for more than 30 minutes at a time?Yes or No
- CheckHSE guidance is that if a task needs a ladder or stepladder for more than 30 minutes at a time, other equipment should be considered.Shown when “Will the ladder be used for more than 30 minutes at a time?” is Yes
- Can it be tied, footed or otherwise stopped from slipping?Yes or No
Harness and lanyard
Webbing, stitching and metal parts.
- Type of inspection*Choose one
- Pre-use check
- Detailed inspection
- Interim inspection
- Make and modelShort answer
- Date of manufacture, from the labelShort answer
- Date of the last detailed inspectionDate
- Days since the last detailed inspectionWorked out by the formShown when “Date of the last detailed inspection” is answered and “Date of inspection” is answered
- GuidanceHSE guidance (INDG367) recommends a detailed inspection at least every six months, and at least every three months for frequently used lanyards, particularly in arduous environments such as demolition, steel erection and scaffolding. Detailed inspections should be recorded.
- CheckMore than six months since the last detailed inspection. Arrange one by a competent person before the equipment is used again.Shown only when the answers above make it relevant
- Webbing: no cuts, abrasion or frayingChoose one
- OK
- Defect
- Stitching: none broken or pulledChoose one
- OK
- Defect
- No damage from chemicals, heat, paint or sunlightChoose one
- OK
- Defect
- Buckles, D rings and adjustersChoose one
- OK
- Defect
- Energy absorber: not deployed or damagedChoose one
- OK
- Defect
- Not applicable
- Connectors: gates close and lockChoose one
- OK
- Defect
- Not applicable
- Label readable, with a unique identificationChoose one
- OK
- Defect
Pallet racking
Walk every aisle. Record each damaged component.
- Are load notices displayed and readable?Yes or No
- Date of the last inspection by a racking specialistDate
- Days since that inspectionWorked out by the formShown when “Date of the last inspection by a racking specialist” is answered and “Date of inspection” is answered
- CheckHSE guidance on warehousing (HSG76) recommends an inspection by a technically competent person at intervals of not more than 12 months, as well as regular in-house inspections like this one.Shown only when the answers above make it relevant
- Did you find any damage?Yes or No
- DamageRepeat for each damage. Each one asks:Shown when “Did you find any damage?” is Yes
- Aisle, bay and level*Short answer
- ComponentChoose one
- Upright
- Beam
- Bracing
- Base plate or floor fixing
- Beam connector or safety lock
- Decking
- Column guard or barrier
- Other (describe)
- What is the damage?Notes
- Risk category*Choose one
- Green: watch
- Amber: repair soon
- Red: offload now
- CheckAmber. Do not put new loads on this rack once it is emptied, and have it repaired. Under the SEMA classification that HSG76 follows, amber damage not repaired within four weeks becomes red.Shown when “Risk category” is “Amber: repair soon”
- WarningRed. Offload the affected racking immediately and keep it out of use until it has been repaired.Shown when “Risk category” is “Red: offload now”
- Repair by (who and date)Short answerShown only when the answers above make it relevant
- PhotosPhotos
- Amber itemsWorked out by the formShown when “Did you find any damage?” is Yes
- Red itemsWorked out by the formShown when “Did you find any damage?” is Yes
- Floor fixings and floor conditionChoose one
- OK
- Defect
- Not applicable
- Beam safety locks in placeChoose one
- OK
- Defect
- Not applicable
- Pallets sound and loads stableChoose one
- OK
- Defect
- Not applicable
- Aisles clear, barriers and guards in placeChoose one
- OK
- Defect
- Not applicable
Defects and result
What you found and whether it can be used.
- Checks OKWorked out by the form
- Checks with a defectWorked out by the form
- Did you find any defects?Yes or No
- Describe each defect and where it isNotesShown when “Did you find any defects?” is Yes
- Photos of the defectsPhotosShown when “Did you find any defects?” is Yes
- Action taken at the timeNotesShown when “Did you find any defects?” is Yes
- Further action neededNotesShown when “Did you find any defects?” is Yes
- Defects and actionsRepeat for each entry. Each one asks:Shown when “Did you find any defects?” is Yes
- Defect and action needed*Notes
- PriorityChoose one
- Urgent
- High
- Medium
- Low
- OwnerShort answer
- DueDate
- StatusChoose one
- Open
- In progress
- Completed
- PhotosPhotos
- Result*Choose one
- Safe to use
- Safe to use with a restriction
- Do not use
- What is the restriction?Short answerShown when “Result” is “Safe to use with a restriction”
- What was done to stop it being used, and who was told?Notes
For example tagged, removed from site, access blocked, bays offloaded.
Shown when “Result” is “Do not use” - WarningHSE says that if you find a problem, do not use the ladder and tell the person in charge of the work.Shown when “Equipment” is “Ladder or stepladder” and “Result” is “Do not use”
- Next inspection dueDate
- GuidanceWhere the law requires work equipment to be inspected, the result must be recorded and kept until the next inspection is recorded.
- Inspector nameShort answer
- Inspector signatureSignature
See it filled in
A completed harness inspection report, made by SiteSurvey from a fictional site visit: every answer, the photos, the guidance that applied and the sign-off, ready to send as a PDF.
Harness inspection FAQs
How often should a harness and lanyard be inspected?
HSE guidance (INDG367) describes pre-use checks, detailed inspections and interim inspections. It recommends a detailed inspection at least every six months, and at least every three months for frequently used lanyards, particularly in arduous environments such as demolition, steel erection and scaffolding. Detailed inspections should be recorded. The form flags a detailed inspection that is more than six months old.
What does a harness pre-use check cover?
The webbing for cuts, abrasion and fraying, stitching that is broken or pulled, damage from chemicals, heat, paint or sunlight, buckles, D rings and adjusters, an energy absorber that has not deployed, connector gates that close and lock, and a readable label with a unique identification. Any defect means the harness is not used until it has been looked at.
Can I use this form for scaffolds, ladders or racking?
It covers them, but each now has its own fuller form: the scaffold inspection checklist with the 7-day register and Schedule 7 report, the ladder inspection checklist with a register of every ladder, and the pallet racking inspection checklist with green, amber and red damage ratings. Use this form for harnesses and other work equipment.
What happens when equipment fails?
The result is safe to use, safe to use with a restriction, or do not use. Do not use asks what was done to stop it being used, such as a tag or removal from site, and who was told. Where the law requires work equipment to be inspected, regulation 6 of the Provision and Use of Work Equipment Regulations 1998 says the result must be recorded and kept until the next inspection is recorded.
Related
Related templates
Templates that go with the harness inspection form
A roof anchor, eyebolt and safety line inspection: each anchor device with its type and location, visual and fixing checks, test where required, label, pass or withdrawn, and the next examination date.
A scaffold inspection register and report: each scaffold or lift with its tag, the 7-day and after-event checks, defects with photos, the result and the regulation 12 report details.
A ladder and stepladder inspection register: pre-use and detailed inspections for each ladder with its ID, the HSE checks, defects with photos and a keep or remove result.
A pallet racking inspection: damage by aisle, bay and level with green, amber and red ratings, offload actions, general checks and the date of the last expert inspection.
Use this harness inspection form with your team
Add it from the form library in one click, change any question, and every completed form becomes a branded PDF report.
Start your trial →